Table lights

Lamps that switch with the bill

No more walking to the switchboard. Each table lamp is wired through a channel of a Waveshare relay board on the club network. QuickBilliard switches it on when the table starts billing and off when the bill is closed — and keeps the two in step all night.

🎱Cashier starts table B2from the floor plan, a tablet or a phone

↓

🖥️QuickBilliard serversends a Modbus command over the club Wi-Fi / LAN

↓

🔌Waveshare 16-CH PoE relaychannel 2 closes — the lamp over table B2 lights

↓

💡Bill paid → lamp offmoved to another table → the lamp moves too

What you need

Waveshare Modbus POE ETH Relay 16CH (16 tables per board, add boards for more)
PoE switch or a 7–36 V supply, one network cable to the board
An electrician to wire each lamp's live through a relay contact (10 A, 250 V AC)
A fixed IP for the board on your club network

What QuickBilliard does

Finds the board and tells you which channel is which — click a channel, watch the lamp
Maps all your tables in one click, then keeps lamps in step with billing
Reads every switch back; a power cut or a manual flip is corrected within 30 seconds
Shows a bulb on every table on the floor plan: lit, off or unreachable
Switches everything off at closing, and when a subscription lapses

On screen

Test every channel before you map a single table

Add the board's IP, press Test connection, click channels and watch lamps light up. Then map tables to channels — or let QuickBilliard map them all at once.

Start free trial →

Hardware pricing

A one-time purchase — the relay controller that switches your table lamps. Wiring is done by a licensed electrician; the controller is all you buy from us.